Soil & Repotting

How to Make ZZ Plant Soil: Ingredients, Ratio and Swaps

By Sara Linwood, houseplant writerLast updated

To make ZZ plant soil, mix 4 parts potting mix, 3 parts pumice and 3 parts orchid bark. The chunky 40/30/30 blend lets the water-storing rhizomes dry fully in about 10 to 21 days, and it matches the ratio in our calculator and ZZ hub.

Glossy ZZ plant stems in a sage green glazed pot on a wooden shelf

What ingredients do you need for ZZ plant soil?

You need a base, a porous mineral and a chunky organic material. ZZ plants store water in thick, potato-like rhizomes, so the soil's main job is to give those rhizomes air and let them dry out completely. This page is the mixing guide. For how this mix compares with others, read the best soil for ZZ plants.

ZZ plant soil ingredients at a glance
IngredientJob in this mixShareGood swap
Potting mixHolds some water and nutrients40%Coir-based indoor mix
PumiceAir and drainage that never breaks down30%Coarse perlite
Orchid barkBig air gaps around rhizomes30%Coco husk chips

Use the same scoop for every part. The soil mix calculator turns these parts into exact cups for your pot size.

Why do ZZ plant rhizomes need pumice?

Pumice keeps the soil around the rhizomes open and fast-draining for years. It is a porous volcanic rock. It holds a little water inside its pores, then releases it slowly, while the gaps between pieces stay full of air.

That matters for ZZ plants because they often stay in the same pot for 2 to 3 years. Organic materials break down in that time and the mix slowly packs tight. Pumice does not break down, so it keeps the structure open as the rhizomes swell. It is also heavier than perlite, which helps keep a top-heavy ZZ from tipping. Look for pieces around 3 to 6 mm (1/8 to 1/4 inch). If you cannot find pumice, coarse perlite works. See perlite vs pumice for the trade-offs.

Why does ZZ plant soil need orchid bark?

Orchid bark creates large air pockets that stop the mix from forming a tight, wet mass around the rhizomes. Rhizomes push outward as they grow. Chunky bark gives way around them instead of compacting.

Choose a small or fine grade, about 1/4 to 1/2 inch (6 to 12 mm). Large chunks leave gaps so big that the potting mix falls through them. Pine or fir bark sold for orchids is ideal. Coco husk chips are a good swap and break down even more slowly. Bark slowly decomposes over 2 to 3 years, which is one reason to replace the mix when you repot.

What does the potting mix do in ZZ soil?

The potting mix fills the small gaps, holds a bit of moisture and carries nutrients. Without it, a mix of only pumice and bark would dry in days and give roots little to feed on.

Use a basic indoor potting mix with no moisture-control additives. A coir-based mix is a good choice because it rewets easily after the long dry spells ZZ plants like. Peat-based mix is fine too, but moisten it before mixing.

How do you mix ZZ plant soil step by step?

Plan on about 15 minutes, including a quick soak for the bark.

Step by step

How to make ZZ plant soil

Time: about 20 minutes

You'll need

  • Indoor potting mix, 4 parts
  • Pumice, 3 parts
  • Small-grade orchid bark, 3 parts
  • Bucket or tub
  • One scoop to measure parts
  • Dust mask
  1. Soak the bark briefly. Dry bark sheds water at first. Soak it in a bucket for 15 to 30 minutes, then drain it. Damp bark blends better and does not float when you first water.
  2. Moisten the potting mix. Sprinkle water on the potting mix and stir until it feels lightly damp, like a wrung-out sponge.
  3. Measure in parts. Add 4 scoops of potting mix, 3 of pumice and 3 of drained bark. For a 6 inch (15 cm) pot, 1 part is about 0.7 cup (170 ml). Check the soil mix calculator for exact amounts.
  4. Mix and squeeze test. Stir until even. Squeeze a handful. It should barely hold together and fall apart at once. If it stays in a ball, add more pumice.
  5. Store leftovers. Keep extra mix in a lidded bucket or a bag with a few holes. Let it air out if it ever smells sour.

How much ZZ plant soil do you need?

Use this table as a quick guide for a standard plastic pot filled to about an inch below the rim. Amounts come straight from our soil mix calculator, which also adjusts for dry or humid homes and terracotta or ceramic pots. Round up a little. Spare mix is useful for topping up after the soil settles.

How much ZZ plant soil to mix by pot size
Pot diameterTotal mixEach ingredient
4 in (10 cm)2 cups (0.5 L)0.75 potting mix, 0.5 pumice, 0.5 orchid bark (cups)
6 in (15 cm)7 cups (1.7 L)2.75 potting mix, 2 pumice, 2 orchid bark (cups)
8 in (20 cm)16 1/2 cups (3.9 L)6.5 potting mix, 5 pumice, 5 orchid bark (cups)
10 in (25 cm)32 cups (7.6 L)12.75 potting mix, 9.5 pumice, 9.5 orchid bark (cups)
12 in (30 cm)55 1/2 cups (13.2 L)22.25 potting mix, 16.75 pumice, 16.75 orchid bark (cups)

Wide, shallow pots need less than these numbers, and tall, narrow ones need more. If you are between sizes, mix for the larger pot and store what is left in a covered tub.

What should you not put in ZZ plant soil?

Leave out anything that stays wet or packs down around the rhizomes:

Ingredients to avoid for ZZ plants
IngredientProblemUse instead
Garden soilDense, heavy, may carry pestsBagged potting mix
Fine sandFills gaps around rhizomesPumice
Moisture-control mixKeeps rhizomes wetBasic indoor mix
Water-retaining crystalsConstant moistureLeave them out
Peat moss as the only basePacks and stays wetPeat plus pumice and bark

Mushy rhizomes are the sign this went wrong. If you see them, read ZZ plant root rot first.

Can you start from a store-bought mix?

Yes. A bagged aroid mix is the closest ready-made match, since it already contains bark and perlite. A cactus mix also works with additions.

  • From aroid mix: use it as is, or add 1 part pumice to every 4 parts for extra drainage.
  • From cactus mix: mix 6 parts cactus mix with 2 parts bark and 2 parts pumice.
  • From regular indoor mix: follow the full 40/30/30 recipe.

Learn more about each material in soil ingredients explained, or see how bagged blends differ in cactus soil vs potting soil.

How do you know your ZZ mix is right after potting?

Watch how fast it dries and how the rhizomes look. A well-made ZZ mix should feel dry 2 inches (5 cm) down within about 10 days in a bright room, and fully dry by 3 weeks. If it is still damp after a month, the mix holds too much water for your space.

Water should vanish from the surface within a few seconds and run out of the drainage hole almost at once. If it pools on top, the potting mix share is too high or too fine. If water runs out before the mix darkens at all, the bark may still be dry and repelling water. Soak the pot from below once and it usually settles.

Reading your ZZ mix
SignWhat it meansAdjust
Still damp at 4 weeksToo much baseAdd pumice
Dry in 4 daysToo lean for your roomAdd potting mix
Water pools on topBase too fineAdd bark
Rhizomes firm and paleMix is rightLeave it

Because ZZ plants grow slowly, you rarely need to tweak the mix more than once. Note what you changed so your next batch starts closer to right.

Advice by situation

Beginners

Use the 40/30/30 recipe and water about once a month. The chunky mix forgives a lot.

Dry homes

Swap 1 part bark for 1 part potting mix so the soil holds water a little longer.

Humid homes

Add 1 extra part pumice. It speeds drying without breaking down.

Over-waterers

Use more pumice and a terracotta pot. Water runs straight through if you overdo it.

Common mistakes to avoid

  • Using large bark chunks. Pick small or fine orchid bark, 1/4 to 1/2 inch.
  • Adding fine sand for drainage. Use pumice instead.
  • Mixing dry bark straight in. Soak it for 15 to 30 minutes first.
  • Burying rhizomes deep in new mix. Keep them just below the surface.
  • Reusing a mix that has broken down. Replace it every 2 to 3 years.

Quick checklist

  • Buy potting mix, pumice and small orchid bark
  • Soak and drain the bark
  • Moisten the potting mix
  • Measure 4 parts mix, 3 pumice, 3 bark
  • Mix evenly
  • Squeeze test: falls apart quickly
  • Store leftovers covered

Frequently asked questions

Can I use cactus soil for a ZZ plant?

Yes, with additions. Mix 6 parts cactus soil with 2 parts bark and 2 parts pumice so the rhizomes get enough air.

Is perlite or pumice better for a ZZ plant?

Pumice is better because it does not float or break down and adds weight to a top-heavy plant. Coarse perlite works if pumice is hard to find.

Can I use regular potting soil for a ZZ plant?

Only as the base. On its own it stays wet too long around the rhizomes. Add pumice and bark.

Do ZZ plants like acidic soil?

They do best in roughly neutral soil, about pH 6.0 to 7.0. Standard potting mix with pumice and bark sits in that range.

Can I use succulent soil for a ZZ plant?

Yes. Gritty succulent mixes suit ZZ plants well. Add a little bark if the blend has none.

How often should I replace ZZ plant soil?

Every 2 to 3 years, when you repot. By then the bark and potting mix have started to break down.